Universities & Government Institutions
TOP 200 – telescopic optical probe for radiance and luminance measurements
Meaurement of radiance and luminance
Details:

The TOP 200 telescopic optical probe is typically used for the testing of displays and panel graphics. It has been completely redesigned and is now based on Pritchard style optics with an integrated alignment camera. In comparison to the previous model (TOP 100), all functions are now controlled via software, so that manual operation is no longer required except for focus adjustment.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
OFG / PLG – Optical fibers and fiber plug adapters
For connecting accessories to the spectrometer
Details:

In order to connect the measurement head or optical probes to the spectrometer, Instrument Systems supplies a range of optical fiber guides (OFG-xxx). These are not attached directly to the spectrometer, but instead to a fiber plug adapter (PLG-xxx) appropriate for each fiber type. The fiber plug adapter is then mounted on the spectrometer's entrance port. This innovative concept means that calibration of the spectrometer remains intact when changing the accessories attached.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
TRA 100 – transmission measurement adapter
measurement of transmission at normal incidence
Details:

The transmission measurement adapter TRA 100 permits determination of the spectral transmission properties of widely ranging materials under normal light incidence. Typical applications include the characterization of optical filters and glasses.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
RMH 45 – reflection measurement head
measurement of diffuse reflection at 45°/0° and specular reflection at 45°/45°
Details:

The RMH 45 reflection measurement head from Instrument Systems is a convenient and inexpensive adapter for reflection measurements. With this adapter both specular reflectance (in the 45º incidence, 45º measurement configuration) and diffuse reflectance (45º and 0º configuration) at the surface of test samples can be determined.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
ISP 150 – Diffuse transmission and reflection measurements
measurement of diffuse transmission and reflection
Details:

The ISP 150 integrating sphere form Instrument Systems is ideally suited for the measurement of transmission and reflection from diffusely scattering objects and test samples. The design of the ISP 150 is compliant with the DIN 5036 standard for diffuse reflection measurements, i.e. 150 mm inner diameter, 25 mm entrance port und 8° angle of incidence. The coating of the ISP 150 is made from barium sulphate.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
GON 360 – Goniometer for specular transmission and reflection measurements
angle dependent measurement of specular transmission and reflection
Details:

Spectral transmission and reflection measurements at any desired angle can be carried out with the GON 360 goniometer. Angles for illumination and measurement can be set independently. Optical fibers are used for connecting the measurement optics with the spectrometer, and the light source with the illumination optics. Models from the LS100 / LS500 series can be used as light sources.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LS 100 / LS 500 – Light sources from the UV to the IR
The light sources of the LS 100 und LS 500 series were developed by Instrument Systems specifically for use with optical fibers. These light sources ensure efficient coupling even into multimode fibers. Assorted versions cover the spectral range from the UV to the IR.
Details:

Features:
-high optical coupling efficiency into optical fibers
-compatible with various fiber connectors
-available in different models for the UV to the IR
SMA connectors and fiber bundle adapters are available for all models, providing compatibility with our measurement accessories and the appropriate type of optical fiber. Stabilized power supplies are available for models from the LS 100 series. For models from the LS 500 series, the power supply is integrated into the housing.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
External optical probes
EOP - Optical probes with diffuser for irradiance measurements
Details:

For measuring irradiance and illuminance as well as for general coupling of light into the spectrometer, Instrument Systems provides a range of optical probes. These differ primarily in the cosine correction, the degree of light throughput and the spectral range. All optical probes include a diffuser for the incident light. Behind the diffuser is the entrance facet of the optical fiber used to couple the light into the spectrometer.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LED test sockets for standard and high-brightness LEDs
Test sockets (standard and high-power)
Details:

Instrument Systems supplies a wide range of LED test sockets with the LED-5xx and LED-6xx series for fast insertion and rapid changing of LEDs at test setups in the laboratory. These precision test sockets can be supplied for all standard LED types and ensure reproducible positioning of the LED in individual measuring adapters.
The list of LED test sockets supplied is continually being updated by types to accommodate the latest series and models from LED manufacturers. Customer-specific adjustments can also be undertaken.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LED-4xx – Luminous intensity measurement adapters for LEDs
For measuring luminous intensity [cd] of LEDs, Instrument Systems has developed a range of suitable measurement adapters. These can be differentiated by their useable spectral range (visible or UV), the required measurement geometry ILED-B and the intended application (laboratory or manufacturing).
Details:

The measurement adapters incorporate a diffuser with a precision aperture of 1 cm² to represent the light sensitive area of the detector. The entrance facet of a fiber bundle is positioned behind the diffuser and serves to couple the light into the spectrometer. This design is characterized by a high light throughput together with acceptable homogeneity of the detector area. The LED-4xx series of measurement adapters is therefore suitable for low light output LEDs as well as for fast production testing.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Integrating Spheres – luminous flux measurement for LEDs and lamps
Assessment of the total radiant power or luminous flux of light sources using integrating spheres is one of the most important tests in light measurement. The inside surface of an integrating sphere is coated with a diffusely reflecting material which guarantees complete integration and homogenization of the emitted radiation. The integrated light is then measured at the detector port.
Details:

Instrument Systems has developed a complete series of integrating spheres, available in a wide range of sizes and providing functionality for a broad spectrum of applications. A deciding factor in choosing the appropriate integrating sphere is the maximum dimension of the light source to be measured. Larger sources require the use of larger integrating spheres in order to keep measurement errors to a minimum.
All integrating spheres have a side entrance port for determining luminous flux in the 2π configuration (i.e. for determining emission into the forward hemisphere only). With the larger integrating spheres, the test object can also be mounted in the center, thus permitting measurements in the 4π configuration (i.e. for determining emission in all directions).

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LEDGON – Goniophotometer for determining spatial radiation patterns
Single LEDs, LED arrays and small modules
Goniometer and optical bench in light-tight enclosure with hinged lid
Details:

The LEDGON goniophotometer from Instrument Systems determines the spatial radiation pattern of LEDs and small LED modules. Measurement is made over the whole forward hemisphere of an emitting LED. A high angle resolution of 0.1° means exact measurements even for narrow emission angle LEDs. In combination with the CAS 140CT spectroradiometer, additional spectral parameters, such as the angle dependence of color coordinates or color temperature, can also be measured. White LEDs, for example, exhibit a significant angle dependence of the color temperature.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LGS 350 – Perfect for mid-sized SSL light sources and LED modules
Medium-sized LED modules and SSL light sources.
Compact setup with integrated control electronics
Details:

The LGS 350 Goniophotometer / Goniospectroradiometer was developed for the analysis of angle-dependent spatial radiation properties from small to medium-sized SSL luminaires and LED modules. The test specimen is operated in a horizontal burning position and measurements can be taken at an angular range of ±160° in the gamma / theta axis.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Special Software
Instrument Systems has developed an assortment of specialized software programs.
Details:

MultiCAS : Simultaneous spectral analysis by up to three CAS140CT spectrometers; permits control and synchronization with a high-speed shutter
MultiTrack : Very fast capture and storage of spectra
CASPulse : Pulsed LED measurements (optical and electrical)
Cal SW : Includes all functions for instrument calibration

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Device DLLs and LabVIEW Drivers
Instrument Systems provides device DLLs und LabVIEW drivers for controlling the spectrometers via individually designed software. The spectrometers can thus be integrated into custom measurement set-ups and used in combination with other devices.
Details:

The device DLLs enable remote control of all spectrometer functions as well as capturing of spectra and all calculated results. The device DLLs include the appropriate routines for calculating radiometric, photometric and colorimetric values. The DLL for the CAS140 B/CT is additionally optimized for high measurement speeds and thus supports production applications where throughput is critical.

The LabVIEW drivers correspond to an extension of each device DLL and make their functionality available in the form of LabVIEW VIs. Sample VIs are included to assist the adoption of this type of programming.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
SpecWin Light – tailor-made for light measurements
Universal laboratory software for MAS40 and CAS140B/CT; includes the measuring modes spectral analysis of light sources and transmission and reflection measurement 
Details:

The SpecWin Light software from Instrument Systems was developed for applications where the full functionality of SpecWin Pro is not required. It places particular emphasis on a simple, intuitive interface. SpecWin Light supports the MAS 40, CAS 120 and CAS 140B/CT series of spectrometers from the LED-Station series. With basic functions for measurement, analysis and documentation, this software package is ideal for routine applications in the laboratory and in quality control.
Features:
-Runs under Windows Vista 32Bit, Windows 7 32Bit and Windows 7 64Bit
-For MAS 40 (LED-Station), CAS 120 and CAS 140B/CT series spectrometers

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
SpecWin Pro – a powerful laboratory software suite
SpecWin Pro provides the highest degree of functionality for the operation of Instrument Systems spectrometers. The software is based on a complete new development and incorporates the most recent programming technologies available for Windows.
Details:

SpecWin Pro further supports the comprehensive range of accessories available from Instrument Systems, including the LEDGON 100 goniophotometer, the DTS 500 positioning system and the TOP 200 telescopic optical probe with video display of the measurement area. An AddOn extends full compatibility to the Keithley 2400 und Keithley 2600 series current sources, so that electrical parameters can be included together with the optical measurements in the analysis and documentation.
Features:
-Runs under Windows Vista 32Bit, Windows 7 32Bit and Windows 7 64Bit
-Compatible with the MAS 40, CAS 120, CAS 140B/CT, SPECTRO 320 R4 and R5 spectrometer series
-Supports LEDGON 100, TOP 200 and DTS 500
-AddOns for Keithley 2400 und 2600 Sourcemeter

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
DTS 500 – a positioning system for automated display and module measurements
Complete 5-axis positioning system with stepper motor control
Details:

The DTS 500 positioning system complements the operation of Instrument Systems spectrometers by providing a route to full automation of measurements. The positioning system is in particular suitable for determining viewing angle dependent properties and spatial homogeneity of display, panel graphics and LED lamp modules. The DTS 500 saves valuable time by eliminating manual alignment and guarantees more exact results with improved reproducibility.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
DTS 400 – Manual Positioner of display measurement
Multifunctional rack for the manual positioning of test sample and measuring device
Details:

This multifunctional rack is ideally suited for the manual positioning of test sample and measuring device while performing radiometric or photometric measurements on displays. It consists of an X-Y mounting for the vertical and horizontal positioning of the tested object. The measuring instrument instead is fixed on a second platform that allows movements in the Z-axis to focus correctly on the test object. Both stages are integrated in a robust and stable construction that avoids unintentional movements or
misalignment.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
DTS 320 NVIS – the reference for NVIS measurements at 0.01 fL
Maximum measurement sensitivity and dynamic range for NVIS measurements at 0.01 fL
Details:

Instrument Systems has developed the DTS 320 NVIS especially for testing displays und panels according to MIL-L-85762A and MIL-STD-3009, respectively. This system is based on the high performance, scanning spectroradiometer Spectro 320 and incorporates a cooled PMT3 photomultiplier and the TOP 200 telescopic optical probe.

DTS 320 test system for night vision displays
The DTS 320 NVIS is ideally suited as a reference system and has been subsequently adopted as the spectroradiometer of choice by the military aviation industry and in recognized test laboratories. The exceptional sensitivity permits measurement of NVIS radiance down 0.01 fL. It is additionally the only spectroradiometer available on the market capable of reliably determining the NVIS black radiance of the modern LCD displays designed for glass cockpits.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
DTS140 NVIS – the new standard for MIL-L-85762A / MIL-STD-3009 measurements
Measurement of night-vision compatibility (NVIS) of displays in conformity with MIL-L-85762A
Details:

Based on the worldwide success of the CAS 140CT array spectrometers, Instrument Systems has developed the DTS140 NVIS for testing displays and panels according to MIL-L-85762A and MIL-STD-3009 standards, respectively. An efficient launching of light into the system is achieved with the TOP 200 telescopic optical probe.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
DTS140 – a universal system for display measurement and more
Universal for all kinds of displays and panel graphics
Details:

Complete systems based on the CAS 140CT array spectrometer featuring a high-end, back-illuminated CCD detector are available for measurements of radiance and luminance as well as color of displays and back-illuminated panel graphics. No matter what kind of display technology has to be tested - whether LCD, CRT, OLED or LED displays - the DTS140 can be used universally.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LED Tester – Turnkey system for production
The LED Tester allows you to transfer the precision of laboratory measurements to production settings. The turnkey test system is based on the proven CAS 140CT CCD Array Spectrometer, Keithley Series 2400/2600 Sourcemeter, and a control PC combined with tester software developed in-house. The interplay between all the components has been optimized for the tough conditions of continuous application in production environments, while retaining the outstanding measuring accuracy of the CAS 140CT.
Details:

The LED Tester can also measure critical measuring parameters, e.g. color coordinates of white LEDs, extremely precisely and reproducibly. All calibrations are based on the PTB and NIST national reference standards. The Keithley 2600 delivers fast current supply to the LEDs and in this way permits short measurement times.
The tester software comprises a user-friendly interface with a multitude of functions. You can select different results and structure their display on the monitor to suit the application. The hardware setup is provided with an entering page in order to configure parameters and settings for each application. A module is provided specifically for wafer probing to permit versatile display with the wafer map.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LumiCol 1900 – 2-in-1 imaging colorimeter for fast and precise display characterization
By combining their expertise and competencies in the field of display metrology, a novel imaging colorimeter for fast and precise luminance and color measurements of flat panel displays was developed by Konica Minolta and Instrument Systems.
Details:

The LumiCol 1900 is a 2-in-1 device, combining an RGB CMOS sensor for fast 2D image acquisition with a spot colorimeter for precise tristimulus color measurements. The colorimeter measurement, performed in a spot in the center of the acquired image, is used to correct the values derived from the CMOS camera, guaranteeing colorimeter precision across the 2D image. As a result, the LumiCol 1900 enables a fast, but still precise characterization of the whole display area in one shot, making it ideal for automated production and quality control.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LumiCam 1300 Advanced – for extremely high requirements
Instrument Systems developed the LumiCam 1300 Advanced with the objective of further enhancing the measuring accuracy of the LumiCam 1300 Color, especially regarding color light and narrowband LED color light.
Details:

This instrument is based on an innovative concept with 6 filters. Alongside the four optical filters of the LumiCam 1300 Color (X'1, X'2, Y', Z'), two additional filters (K', L') are used. In combination with an optimized algorithm, the tristimulus values are calculated much more accurately compared with previous methods.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
LumiCam 1300 Mono and Color – fast measuring systems for versatile applications
The LumiCam 1300 Color imaging photometer and colorimeter captures complex luminance and color distributions of displays and electronic panel graphics within seconds.
Details:

The measuring systems of the LumiCam 1300 series use a high-quality CCD sensor with 1370 x 1020 pixels. A calibrated luminance, and possibly a color value, is assigned to each pixel during the measurement. This results in the creation of two-dimensional images presenting the spatially resolved measurement values coded for brightness or color.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
CAS 140CTS – The ideal spectrometer for fast and highly accurate measurements
Short integration and read-out times at very high accuracy and signal dynamic range
Details:

The CAS 140CTS is the most recent member of the Instrument Systems Array Spectrometer family. The detector concept based on a back-thinned CCD area sensor of the proven CAS 140CT was completely redesigned. The new detector unit allows the minimum integration time to be improved from 10 ms to 4 ms. At the same time, the read-out time was reduced to ~ 6 ms so that the CAS 140CTS features particularly short measurement times.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
CAS 140CT – The Standard for Array Spectrometers
Different models from 200-2150 nm; dark-current shutter and density filter wheel are integrated; very high level of accuracy and signal sensitivity
Details:

The CAS 140CT, already in its 3rd generation, is the most successful array spectrometer from Instrument Systems worldwide. These instruments combine high accuracy with an opto-mechanically robust design and a simple operation. The range of applications is thus correspondingly wide - from 24 hour, round-the-clock operation in manufacturing to use as a reference instrument in calibration laboratories.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
MAS 40 – Quality and measurement precision at low cost
Power supply through USB interface; dark current measurement and change in density filters are performed manually
Details:

The MAS 40 Mini-Array Spectrometer is very versatile and ideal for application in industrial quality control, research and development work. This spectrometer meets all the quality specifications guaranteed by Instrument Systems in a spectroradiometer designed for absolute measurement of light radiation in cost-sensitive applications. The full range of accessories from Instrument Systems can be connected to the MAS 40 using a fiberoptic cable. This capability allows users to access the full range of applications offered by the instrument.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
CAS 120 – The powerful spectrometer for QC and LED production
The CAS 120 is a new series of the proven CCD Array Spectrometers from Instrument Systems and presents an appealing solution for cost-sensitive applications like LED production and quality assurance.
Details:

Features:
-Model versions UV/VIS and VIS
-Precision spectrograph with integrated density filter wheel (OD 1 – 4)
-Shutter for automatic dark current correction
-2048 x 14 pixels back-illuminated CCD detector, 16 bit ADC
-Short integration times of 4 ms
-USB interface
-Hardware I/O trigger

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectro 320 – the most accurate and universal Spectrometer
The Spectro 320 is based on an innovative Fast-Scan technology that combines accurate and fast measurements with high dynamic range.
Details:

Features:
-Fast-Scan technology for high wavelength accuracy and signal dynamic combined with short measurement times
­up to 190 - 5000 nm spectral range in a single scan
-optional cooled photomultiplier as well as cooled silicon and extended InGaAs detectors (up to 2150 nm) are available
­programmable spectral resolution (bandpass) and wavelength steps
-integrated optical density and order sorting filter wheels
-RS-232 and IEEE-488 interfaces
­standard SCPI command protocol for simple remote control and programming
-optional Optical Port with optical output and detector input ports

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
2D Color Analyzer CA-2500
The CA-2500 can measure luminance and chromacity distribution of displays principally for inspection and adjustment of uniformity, mura, white balance, gamma and contrast. The high resolution CCD uses XYZ filters to closely match the human eye and can assess multiple displays in one measurement.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectrophotometer CM-3700A
Konica Minolta's top of the range spectrophotometer for reflectance and transmittance color measurement. The best benchtop spectrophotometer for customers requiring absolute accuracy of liquid or solid samples. Ideally suited to applications like color matching or for specification of color to a global supply chain.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectrophotometer CM-3600A
The CM-3600A is a versatile benchtop spectrophotometer designed to meet the color measurement needs of laboratory, R&D and production users. The instrument provides accurate color data for all manner of solid and liquid samples and can even measure haze.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectrophotometer CM-5
The CM-5 is a very versatile bench-top spectrophotometer to measure the color of solid, pasty granular and liquid samples either in reflectance or transmittance. The top-port concept, offering various aperture sizes, allows measurement of almost any kind of samples.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Colibri Software
One software platform for color control, scalable from one site to a global supply chain. Colibri color management systems help designers, brand owners and management companies, manufacturers and suppliers to specify, produce, manage and communicate color.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
CM-SA Skin Analysis Software
CM-SA Skin Analysis Software works in combination with Konica Minolta spectrophotometers to measure the color of skin simultaneously with a numerical display of the Melanin Index, Hemoglobin oxygen saturation (Hb SO2) Index, and Hemoglobin (Hb) Index.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectramagic DX
SpectraMagic DX is a color measurement and control software suitable for almost any industry such as Plastics, Paint & Coatings, Cosmetics.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectramagic NX
SpectraMagic™ NX is a color measurement software package that can be used to interface with Konica Minolta instruments and provide extended reporting and analysis of color and color difference with full control of customisation of templates and reports.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectroradiometer CS-2000A
A high end spectroradiometer for light sources and displays that measures spectral data, luminance and chromacity. Fast measurement times with high repeatability ideal for the low luminance blacks and contrast measurements on modern displays. Accurate as low as 0.0005 cd/m2 providing accurate contrast measurements at 1,000,000:1.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectroradiometer CS-2000
A high end spectroradiometer for light sources and displays that measures spectral data, luminance and chromacity. Fast measurement times with high repeatability ideal for the low luminance blacks and contrast measurements on modern displays.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Luminance and Color Meter CS-200
The CS-200 measures luminance and chromaticity of light emitting products as diverse as large plasma displays, compact LCDs and LEDs, outdoor screens, high pressure lamps, and instrument panels.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Luminance and Color Meter CS-150/CS-160
Spot measurement of color and luminance in a handheld portable instrument, the CS-150 and CS-160 are lightweight, compact and battery powered luminance and color meters for the measurement of a wide range of luminance conditions and non contact measurement of color.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Luminance Meter LS-150/LS-160
The LS-150 and LS-160 are lightweight, compact and battery powered luminance meters for the measurement of light sources and reflected light. The LS-150/160 feature an improved correlation to V(?) and a greatly improved measurement range up to 999,900 cd/m2 (LS-150) and 9,999,000 cd/m2 (LS-160).
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Color Analyzer CA-410
The Color Analyzer CA-410, with higher-accuracy measurement,can measure and adjust chromaticity and gamma characteristics of smartphone, tablet, television and other HDR displays across a wider luminance range.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Illuminance Spectrophotometer CL-500A
A hand held Illuminance spectrophotometer ideal for the measurement of LED lighting. The CL-500A provides full spectral data from 360-780nm allowing accurate assessment of color rendering and other measures such as lux and color temperature that are traceable to international standards.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Chroma Meter CL-200A
The CL-200A is a cost effective and portable solution for measuring illuminance and color of light including LED and EL lighting. Measurement data includes lux, CCT, xy coordinates and can be used for LED binning or matrix measurements over a large area.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Illuminance Meter T-10A/T-10MA
The handheld T-10A and T-10MA (Mini receptor) measure the quality and brightness of a light source as it lies along a surface. It can be connected to each other to form multi-point units and is easily controlled with a PC.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectrophotometer CM-25d /26d
The dual aperture model Spectrophotometer CM-26d and the single aperture Spectrophotometer CM-25d enables digital color data management across increasingly globalized supply chains. It is ideal for evaluating color of automotive interior parts and smartphones/tablets exterior.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectrophotometer CM-25cG
The CM-25cG is designed to measure color and gloss simultaneously. with 45˚c:0˚ geometry and integrated 60˚ gloss sensor, this portable spectrophotometer is ideal for measuring automotive interiors.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Spectrophotometer CM-600d/700d
Ideal for color measurement of solid samples. The vertical alignment of spectrophotometer CM-700d and CM-600d means that it has a small footprint, perfect for small or curved surfaces.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Chroma Meter CR-400/CR-410
The CR-400 and CR-410 are cost effective QC color measurement instruments with 8mm and 50mm measuring apertures for either reglar or irregularly colored or textured samples.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Accessories & Options
45⁰ Viewing StandVariable
Angle Viewing Table
Matte Black Insert Panel Sets
Accessory Direction Light
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Color Reader CR-20
The CR-20, successor to CR-11, CR-13 and CR-14, is a easy-to-use, light-weight, portable and compact color reader. It is ideal for entry level absolute color measurement and inspection.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Color Matching Lamps
GTI ColorMatcher® 6500K Color Matching Lamps for Color Matching, Inspection, and Aesthetic Appraisal
Details:

Standard Features :

● ASTM D1729, SAE J361, and ISO 3668 compliance
● Superior to other 6500 Kelvin lamps
● CRI rating of B/C
● Full spectrum daylight

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
SCV Simultaneous Color Viewer
The Simultaneous Color Viewer (SCV) is designed to help detect metamerism and test color harmony by allowing a visual side-by-side comparison of colors under four different light sources.
Details:

Standard light sources are :

● Daylight (D65 or D50)
● LED (3500K)
● Store light (4100K CWF or TL84)
● Home light incandescent (CIE A)

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Color Rendition Demonstrator
The Color Rendition Demonstrator (CRD) is an educational and communication tool that allows you to easily demonstrate the effects different light sources have on identical color samples.
Details:

Standard Features:

Educational tool
Compare the same print under three unique light sources
Includes store light, daylight and home light
No assembly required

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
PDV-2e/M Multi-Source Portable Desktop Viewer
The compact PDV-2e/M provides an ASTM D1729-2009 compliant desktop viewing station. Its unique hinged design allows for quick and easy set-up and storage. It is ideal for client presentations, lab applications, and any business that critically views color.
Details:

Features include :

● Four light sources—D65, CWF (TL84 optional), Incandescent, and UV
● Elapsed time meter to monitor usage of the daylight source
● Operates on 100V–240V
● Side walls assure tight control of viewing environment
● Viewing area of 7.5″D × 19″W × 13″H (19 cm × 48 cm × 13 cm)

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Color Reader CR-10 Plus
The CR-10 Plus is an affordable handheld color reader for quick and easy color control on almost any samples and materials.
Details:

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
Vertical Color Matching Booth
The VCMB vertical color viewing system is designed to provide consistent and accurate viewing conditions that comply with the ASTM D1729 standard
Details:

Standard Features:

● Five light sources for critical color matching
● ColorGuard® II viewing system monitor
● Overhead and lower illumination
● Easy to move on included floor casters
● Available in three standard sizes

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
GLL-e Luminaires
GTI’s overhead luminaires are the key component when configuring an industry compliant large sample viewing area.
Details:

The GLL-e is an affordable luminaire that provides up to three light sources. GLL-e luminaires must be hard wired into individual power circuits (one for each light source) and do not have a built in light control selector.

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
GLE-M Luminaires
GTI’s overhead luminaires are the key component when configuring an industry compliant large sample viewing area.
Details:

Standard Features:

● Designed for large sample color evaluation
● ASTM D1729, SAE J361, ISO 3668, and AATCC Procedure #9 compliance
● Multiple light sources
● Four and five foot lengths

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
The GTI MiniMatcher® series
The tabletop MiniMatcher series is ideal for the viewing of cosmetics, coatings, consumer goods, ink, packaging, fashion, and more. The ASTM D1729 compliant MiniMatcher series is available in five standard models.
Details:

Standard Features:

● Range of sizes and models available
● ASTM D1729, SAE J361, and ISO 3668 compliance
● NIST traceable certificate of product conformance included
● Multiple light sources

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More
The GTI ColorMatcher® series
The GTI ColorMatcher® series includes four standard models and is available with a variety of storage options and configurations.
Details:

Standard Features:

● Range of sizes and models available
● ASTM D1729, SAE J361, and ISO 3668 compliance
● NIST traceable certificate of product conformance included
● D65 light quality
● Multiple light sources

Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Read More