- Agriculture
- Ceramic
- Display
- Home Appliances
- Jewelry
- Lighting
- Pharmaceutical
- Printing and Packaging
- Textile & Leather
- Paint & Coatings
- Coatings
- Inks
- Plastics
- Rubber
- Construction
- Cosmetics & Personal Care
- Flavors & Fragrances
- Food & Beverage
- Automotive & Auto Parts
- Universities & Government Institutions
- Electrical & Electronics
- Pulp & Paper
- Chemicals
- Packaging

• Measures: Un-Inflated: 29"" W x 640 feet L
• Film Thickness: 1.2 mil LDPE low-density polyethylene, Anti-Static blend
• Pillow Pak Quilt Medium film requires a Pillow Pak Support Arm Kit, item# 9091326. Please see our accessories section.
• Design: Perforation every 6.""
• LPDE #4 recyclable

• Measures: Un-Inflated: 29"" W x 640 feet L
• Film Thickness: 1.2 mil LDPE low-density polyethylene, green blend
• Pillow Pak Biodegradable Quilt Medium film requires a Pillow Pak Support Arm Kit
• Design: Perforation every 6.""
• LPDE #4 recyclable

• Measures: Un-Inflated: 29"" W x 640 feet L
• Film Thickness: 1.2 mil LDPE low-density polyethylene, standard blend
• Pillow Pak Quilt Medium film requires a Pillow Pak Support Arm Kit, item# MM2MEPPARM.
• Design: Perforation every 6.""
• LPDE #4 recyclable

This item is carton pricing, two (2) rolls per carton.
• Measures: 8"" wide x 1066 linear feet / 203mm wide x 325m per roll
• Film Thickness: 1.2 mil / 30 microns, LDPE low-density polyethylene
• Design: Easy tear perforation every 8.""
• LPDE #4 recyclable

This item is carton pricing, two (2) rolls per carton.
• Measures: 8"" wide x 1066 linear feet / 203mm wide x 325m per roll
• Film Thickness: 1.2 mil / 30 microns, LDPE low-density polyethylene
• Design: Easy tear perforation every 4.0""
• LPDE #4 recyclable

This item is carton pricing, two (2) rolls per carton.
• Measures: 8"" wide x 1066 linear feet / 203mm wide x 325m per roll
• Film Thickness: 1.2 mil / 30 microns, LDPE low-density polyethylene
• Design: Easy tear perforation every 4.0""
• LPDE #4 recyclable

This item is carton pricing, two (2) rolls per carton.
• Measures: 8"" wide x 1066 linear feet / 203mm wide x 325m per roll
• Film Thickness: 1.2 mil / 30 microns, LDPE low-density polyethylene
• Design: Easy tear perforation every 4.0""
• LPDE #4 recyclable

This item is carton pricing, one (1) roll per carton.
• Measures: 15.5"" wide x 656 linear feet / 400mm wide x 200m per roll
• Film Thickness: 1.76 mil / 44 microns, LDPE low-density polyethylene
• Design: Perforation every 6.""
• LPDE #4 recyclable

This item is carton pricing, one (1) roll per carton.
• Measures: 15.5"" wide x 656 linear feet / 400mm wid
• Film Thickness: 1.76 mil / 44 microns, LDPE low-density polyethylene
• Design: Perforation every 6.""
• LPDE #4 recyclable

This item is carton pricing, one (1) roll per carton.
• Measures: 15.5"" wide x 656 linear feet / 400mm wide x 200m per roll
• Film Thickness: 1.76 mil / 44 microns, LDPE low-density polyethylene
• Design: Perforation every 6.""
• LPDE #4 recyclable

MINI PAK'R MACHINE 110V: W 13 "x D 13 1/2" x H 11 1/2"

Standard Features :
● ASTM D1729, SAE J361, and ISO 3668 compliance
● Superior to other 6500 Kelvin lamps
● CRI rating of B/C
● Full spectrum daylight

Standard light sources are :
● Daylight (D65 or D50)
● LED (3500K)
● Store light (4100K CWF or TL84)
● Home light incandescent (CIE A)

Standard Features:
Educational tool
Compare the same print under three unique light sources
Includes store light, daylight and home light
No assembly required

Features include :
● Four light sources—D65, CWF (TL84 optional), Incandescent, and UV
● Elapsed time meter to monitor usage of the daylight source
● Operates on 100V–240V
● Side walls assure tight control of viewing environment
● Viewing area of 7.5″D × 19″W × 13″H (19 cm × 48 cm × 13 cm)

Standard Features:
● Designed for large format and dimensional viewing
● Multiple light sources
● Customizable
● Range of sizes
● Complies with industry standards

Standard Features:
● Five light sources for critical color matching
● ColorGuard® II viewing system monitor
● Overhead and lower illumination
● Easy to move on included floor casters
● Available in three standard sizes

The GLL-e is an affordable luminaire that provides up to three light sources. GLL-e luminaires must be hard wired into individual power circuits (one for each light source) and do not have a built in light control selector.

Standard Features:
● Designed for large sample color evaluation
● ASTM D1729, SAE J361, ISO 3668, and AATCC Procedure #9 compliance
● Multiple light sources
● Four and five foot lengths

Standard Features:
● Range of sizes and models available
● ASTM D1729, SAE J361, and ISO 3668 compliance
● NIST traceable certificate of product conformance included
● Multiple light sources

Standard Features:
● Range of sizes and models available
● ASTM D1729, SAE J361, and ISO 3668 compliance
● NIST traceable certificate of product conformance included
● D65 light quality
● Multiple light sources

Highly reliable and accurate – one of the most reliable and accurate spectrophotometers available by utilizing state-of-the-art technology
Windows compatible – Compatibility allows it to be controlled from a computer with Windows software
Measurement area switching – flexibility allow users to select either 25.4mm, 8mm, or 3x5mm measurement areas
Can measure reflective, transparent, and fluorescent color – using SCI/SCE switching, diffused lighting, and/or UV cut filters, users can easily measure reflective, transparent, and reflective colors
International standards – many standards are included in the CM-3700ACIE, such as ISO, ASTM, DIN, and JIS
Xenon flash – allows even very dark shades to be accurately measured with this instrument
USB Connectivity – faster communication and an easier connection to PCs with the USB interface
Dampening sample holder – not only does the featured long arm enable measuring the center of an A4-sized sample, a damper also provides a “slow-close” effect, preventing the sample holder from slamming shut, which could possibly damage the measurement sample
Protective frame power switch – to decrease the likelihood of accidentally powering off during operation, a protective frame has been added around the power switch

● Reflectance and Transmittance in One Instrument
The CM-3600A can measure both the reflectance of opaque objects and the transmittance of transparent or translucent solid materials such as plastics. (With accessories, the CM-3600A can even measure the transmittance of liquids.)
For reflectance measurements, the CM-3600A employ di:8°, de:8° (diffuse illumination, 8° viewing) geometry which conforms to ISO, CIE, ASTM, DIN, and JIS standards. For transmittance measurements, the CM-3600A employ d:0° (diffuse illumination, 0° viewing) geometry which conforms to ISO, CIE, ASTM, and DIN standards.
● Bright, Clear Sample Viewer for Accurate Sample Positioning
Opening the sample viewer provides a clear, illuminated view of the sample at the measurement port. On the CM-3600A, this view is reflected in a mirror on the sample viewer cover so that you can view it easily even while seated.
● Three Measurement Areas For Diverse Needs
Masks for the CM-3600A’s three measurement areas (SAV: Ø4 mm, MAV: Ø8 mm, and LAV: Ø25.4 mm) are included as standard accessories, so you can select the one that fits your measurement requirements.

● di:8°, de:8° (diffused illumination, 8° viewing angle)
● High Inter-Instrument Agreement(IIA)
∆E*ab< 0.12; Average of BCRA 12 Tiles (CM-26d)
∆E*ab< 0.20; Average of BCRA 12 Tiles (CM-25d)
● Changeable measuring apertures -Ø8mm or Ø3mm measurement areas (CM-26d)
● Viewfinder for easy target alignment
● JOB function*1 for creating workflows (with graphical instructions)
● Configuration Tool CM-CT1 software (standard accessory)
● Bluetooth ready
*1 Setting enabled by SpectraMagic NX

● Color Measurement: 45c:0 (45°illumination / 0°viewing angle)
● Gloss Measurement: 60°
● Inter-Instrument Agreement (IIA):
● Color: ∆E*ab< 0.15 (Average of BCRA 12 Tiles)
● Gloss: ∆GU< +0.2GU (0-10GU), ∆GU< 0.5GU (10-100GU)
● Circumferential illumination optical system
● Measurement Speed: approximately 1 second
● Vertically shaped for easy handling and positioning
● Rechargeable lithium ion battery
● Wireless and USB communication

● Easy to use and ergonomic, making it great for first-time users
● Color difference expressed in L*a*b* and dE* or L*C*H* and dE* on the LCD screen
● Built in storage for up to 1,000 measurement including target data
● USB connectivity for easy PC connection
● On board Utility Software application
● Lightweight, compact size and battery-operated allowing it to be taken almost anywhere







Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com


Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Angle Viewing Table
Matte Black Insert Panel Sets
Accessory Direction Light


Standard Features :
● ASTM D1729, SAE J361, and ISO 3668 compliance
● Superior to other 6500 Kelvin lamps
● CRI rating of B/C
● Full spectrum daylight
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Standard light sources are :
● Daylight (D65 or D50)
● LED (3500K)
● Store light (4100K CWF or TL84)
● Home light incandescent (CIE A)
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Standard Features:
Educational tool
Compare the same print under three unique light sources
Includes store light, daylight and home light
No assembly required
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Features include :
● Four light sources—D65, CWF (TL84 optional), Incandescent, and UV
● Elapsed time meter to monitor usage of the daylight source
● Operates on 100V–240V
● Side walls assure tight control of viewing environment
● Viewing area of 7.5″D × 19″W × 13″H (19 cm × 48 cm × 13 cm)
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com


Standard Features:
● Designed for large format and dimensional viewing
● Multiple light sources
● Customizable
● Range of sizes
● Complies with industry standards
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Standard Features:
● Five light sources for critical color matching
● ColorGuard® II viewing system monitor
● Overhead and lower illumination
● Easy to move on included floor casters
● Available in three standard sizes
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

The GLL-e is an affordable luminaire that provides up to three light sources. GLL-e luminaires must be hard wired into individual power circuits (one for each light source) and do not have a built in light control selector.
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Standard Features:
● Designed for large sample color evaluation
● ASTM D1729, SAE J361, ISO 3668, and AATCC Procedure #9 compliance
● Multiple light sources
● Four and five foot lengths
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Standard Features:
● Range of sizes and models available
● ASTM D1729, SAE J361, and ISO 3668 compliance
● NIST traceable certificate of product conformance included
● Multiple light sources
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com

Standard Features:
● Range of sizes and models available
● ASTM D1729, SAE J361, and ISO 3668 compliance
● NIST traceable certificate of product conformance included
● D65 light quality
● Multiple light sources
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com