Inks
Thasorb
UV-Absorbers, Hindered Amine Light Stabilizers
Details:

UV-Absorbers, Hindered Amine Light Stabilizers for paint coating ink plastic rubber and automotive part

Read More
Thanox
General Antioxidants, Specialty Antioxidants, Blend Addtives
Details:

General, Specialty Antioxidants for paint coating ink plastic rubber and automotive part

Read More
SpectraFlairSilver 1400 Series
SpectraFlair pigments are light diffractive colorants that generate the appearance of multiple, bright rainbow producing prisms moving over a liquid silver color.
The combination of rainbow-like color, aluminum core and fine particle size in SpectraFlair pigments create the appealing, iridescent, liquid silver metallic
appearance. SpectraFlair pigments change from a typical metallic paint appearance in low illumination, to vivid,multi-rainbow paints in direct bright light.
SpectraFlair Bright Silver
JDSU Bright Silver pigments offer dramatic, diamond like sparkle usually associated with much larger particle-size pigments. The thinner Bright Silver HSA offers a more liquid silver appearance and improved hiding power for a lower-cost option.
SpectraFlair Plus 25
SpectraFlair Plus 25 is a new diffractive pigment using JDSU proprietary technology to precisely control particle size. As seen in the SEM photomicrograph, nearly each flake is 25x25 microns.
Details:

With a flake thickness less than 0.30 microns, Plus 25 has up to three times the surface area as compared to
SpectraFlair 1400- and 1500-Series diffractive pigments, significantly improving hiding power. The net benefit is a stronger, more dramatic diffractive effect and significantly lower applied cost.

Read More
SpectraFlairSilver 1500 Series
SpectraFlair pigments are light diffractive colorants that generate the appearanceof multiple, bright rainbow producing prisms moving over a liquid silver color.
The combination of rainbow-like color, aluminum core and fine particle size in SpectraFlair pigments create the appealing, iridescent, liquid silver metallic
appearance. SpectraFlair pigments change from a typical metallic paint appearance in low illumination, to vivid,multi-rainbow paints in direct bright light.
ChromaFlair L-Spec Light Interference
ChromaFlair L-Spec is ideal for general-purpose applications. Seven standard colors are currently available and their names reflect the color seen at
approximately 0° and 45° respectively, the number represents the pigment’s approximate hue at normal viewing angle.
Details:

ChromaFlair pigments are unique, multi-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles. Created using a revolutionary thin-film technology, each flake exhibits a wide range of hues depending on the angle at which it is viewed
and the angle of incidence of light – a dramatic color shift that is even achievable in low-light environments. Highly chromatic, durable and easy to incorporate, ChromaFlair pigments can add value and appeal to virtually any product where color is a key differentiating factor.

Colour : Red/Gold 000L, Silver/Green 060L, Gold/Silver 080L, Green/Purple 190L, Cyan/Purple 230L, Blue/Red 280L, Magenta/Gold 334L

Read More
ChromaFlair T-Spec Light Interference
ChromaFlair T-Spec is particularly suited for the OEM automotive and refinishing industries, where tighter and more consistent color tolerances are
required. Seven standard colors are currently available and their names reflect the color seen at approximately 0° and 45° respectively, the number represents the
pigment’s approximate hue at normal viewing angle
Details:

ChromaFlair pigments are unique, multi-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles. Created using a revolutionary thin-film technology, each flake exhibits a wide range of hues depending on the angle at which it is viewed
and the angle of incidence of light – a dramatic color shift that is even achievable in low-light environments. Highly chromatic, durable and easy to incorporate, ChromaFlair pigments can add value and appeal to virtually any product where color is a key differentiating factor.

Colour : Red/Gold 000, Silver/Green 060, Gold/Silver 080, Green/Purple 190, Cyan/Purple 230, Blue/Red 280, Magenta/Gold 334

Read More
ChromaFlair WR Series
ChromaFlair WR Series pigments, available in five popular colors, are suitable for waterborne paints and coatings. Sol-gel encapsulation
technology (trapping pigment inside a shell of amorphous silicon dioxide) provides long shelf stability and prevents oxidation of the aluminum layer.
Metashine Iron Oxide Coat Series
The Metashine Iron Oxide Coat Series consists of GLASFLAKE products coated with iron oxide.
Details:

With the standard type, gold to russet colour tones specific to iron oxide can be expressed.
A black type with blackness added by reduction-treating the iron oxide layer is also available.

Average Particle Size : 30, 80 ?m
Colour : TY (Gold)
Substrate Thickness : 1 ?m

Read More
Metashine Silver Coat Series
The Metashine Silver Coat Series consists of GLASFLAKE products coated with silver.
Details:

The use of silver achieves remarkably strong brilliance.
There are also additional products coated with pure gold on top of the silver.

Average Particle Size : 25, 30, 80, 90, 150, 230, 480 ?m
Colour : PS (Platinum Silver)
Substrate Thickness : 1, 5 ?m

Read More
Metashine Titania Coat Series
The Metashine Titania Coat Series consists of GLASFLAKE products coated with titanium dioxide.
Details:

The Metashine Titania Coat Series is defined by high transparency and brilliant interference colours. Both glass and titanium dioxide are transparent substances and, therefore, products of this series provide high transparency.
In the light that reflects off the coated layer and glass surface, a difference in optical path is generated. By adjusting the coating thickness of the titanium dioxide, the optical path difference is varied and five colours of interference light are generated.

Average Particle Size : 20, 30, 40, 80, 120 ?m
Colour : RB (Blue), RG (Green), RR (Red), RY (Yellow), RS (Silver)
Substrate Thickness : 1 ?m

Read More
Alu Flake
Alu*Flake glitter is precision cut from highly reflective aluminum foil which has been clear coated or colored with a transparent coating.
Details:

Glitterex Aluminum Flake was specifically designed to meet the requirements of manufacturers of decorated fabrics, adhesives, vinyl, sheeting, plastic moldings, inks, paints, and many other products which require glitter of outstanding physical and chemical properties.Alu*Flake can withstand temperatures up to 550 degrees F (287 C) without loss of color or reflectivity. This temperature endurance, as well as Alu*Flake's solvent and fade resistance, makes it an ideal plastics additive for use in injection molding, roto-molding and masterbatch extrusion.
Thickness : 0.5mil(.0005")
Shade : Silver, Colors
Shape : 1/8" Hearts, 1/8" Stars, 3 mm Dots, 5/32" Daisies

Read More
Disco LR
Disco LR series is commonly used for the following applications: Solvent based paints and coatings additive, nail polish additive, and an epoxy-flooring additive. It is also used as a flake pigment in automotive aftermarket refinishing.
Details:

Brightest and least expensive of the Disco series
Thickness : 1mil(.001")
Shape : 1/8" Hearts, 1/8" Stars, 3 mm Dots, 5/32" Daisies

Read More
Disco HT
Disco HT series meets the requirements as a cosmetic additive. It is widely used as a staple in the floral supply industry, and is used as a water-based paint additive in the craft industry for a wide variety of applications, which include screen printing, soap making, scrapbook decorating, and wearable fabric embellishment.
Details:

Brightest and least expensive of the Disco series
Thickness : 1mil(.001")
Shape : 1/8" Hearts, 1/8" Stars, 3 mm Dots, 5/32" Daisies

Read More
Holo Gram
Holo Gram glitter is precision cut from polyester films which have been micro embossed and metallized. The holographic effects are obtained by light interference. Colored Holo*Gram glitter is made by applying colored coatings to these films to obtain spectacular rainbow effects. Holo*Gram glitter is also water and solvent resistant. The versatility, quality and durability of Holo*Gram glitter allows it to be used in a wide variety of applications.
Details:

Glitterex Holo Gram was specifically designed to meet the requirements of manufacturers of decorated fabrics, adhesives, vinyl, sheeting, plastic molding, inks, paints, and many other products which require glitter of outstanding physical and chemical properties.
Thickness : 2mil(.002"), 1mil(.001"), 0.5mil(.0005")
Shade : Polyester Colors, Neon Polyester Colors, Holo Colors, Coated Silver, Uncoated Silver, Ctd. Silver & Golds, Silver & Color
Shape : 1/8" Hearts, 1/8" Stars, 3 mm Dots, 5/32" Daisies

Read More
Poly Flake
Poly Flake is our premium and most versatile line of precision cut glitter. The versatility, quality and durability of Poly*Flake glitter allows it to be used in a wide variety of applications. It is cut from brilliant metallized polyester film which can be colored to provide glitters that are brilliant, transparent, light fast, water and solvent resistant.
Details:

Glitterex Polyester Flake was specifically designed to meet the requirements of manufacturers of decorated fabrics, adhesives, vinyl, sheeting, plastic molding, inks, paints, and many other products which require glitter of outstanding physical and chemical properties.
Thickness : 3mil(.003"), 1mil(.001"), 0.5mil(.0005")
Shade : Crystal Clear, Ctd. Silver & Color, Uncoated Silver
Shape : 1/8" Hearts, 1/8" Stars, 3 mm Dots, 5/32" Daisies

Read More
OPTICAL BRIGHTENERS
DAY-GLO Optical Brighteners are recommended for leak detection and product identification when exposed to UV light. These brighteners are highly fluorescent under UV light (black light). They also offer good solubility and thermal stability.
Details:

OPTICAL BRIGHTENERS
D-298 Columbia Blue (Solvent Soluble)
D-286 Sky Blue (Solvent Soluble)
D-282 UV-Blue (Water Soluble)
D-211 Ice Blue (Solvent Soluble)

Read More
NightGlo NG-880
Fade Resistant Phosphorescent
Details:

NG-880 is a Zinc Pigmentsulfide compound that responds quickly to excitation by daylight, incandescent,
fluorescent or ultraviolet lights. This emits a bright Green phosphorescence Pigmentshade. It exhibits high initial brightness and afterglow. The afterglow effect is dependent on concentration, Pigmentsurface area and amount of radiant energy absorbed.

Read More
NightGlo NG-200
Phosphorescent
Details:

NG-200 is a Zinc Pigmentsulfide compound that responds quickly to excitation by daylight, incandescent,
fluorescent or ultraviolet lights. This emits a bright Green phosphorescence Pigmentshade. It exhibits high initial brightness and afterglow. The afterglow effect is dependent on concentration, Pigmentsurface area and amount of radiant energy absorbed.

Read More
NightGlo NGX-19/NGX-19SP
NGX-19/NGX-19SP: Unique mixed metal oxide phosphorescent Pigments that produce a brilliant vibrant blue afterglow for over 15 hours. NGX-19 has an average particle Pigmentsize of 28 microns and the PigmentsP or Pigmentsmall particle version has an average particle Pigmentsize of 18 microns. They offer exceptional effects in coatings, plastics and Pigmentscreen inks and are compatible in both water and Pigmentsolvent Pigmentsystems.
Details:

DayGlo Color NightGlo NGX-19 is a mixed metal oxide photoluminescent that phosphoresces up to 10 times as long as traditional zinc Pigmentsulfide Pigments.
NGX-19 offers a Pigmentstrong, persistent afterglow that emits a blue hue up to 15 hours after charging. It is compatible in both Pigmentsolvent and water Pigmentsystems.

Read More
NightGlo NGA-88
NGA-88: NGA-88 is a Copper doped Zinc Pigmentsulfide like NG15 and NG-20. This 18 micron particle Pigmentsize
is unique because of its enhanced fade resistant properties, making it more Pigmentsuitable for light outdoor
exposure.
Details:

NGA - 88 is a Zinc Pigmentsulfide compound that responds quickly to excitation by daylight, incandescent,
fluorescent or ultraviolet lights. This emits a bright Green phosphorescence Pigmentshade. It exhibits high
initial brightness and afterglow. The afterglow effect is dependent on concentration, Pigmentsurface area
and amount of radiant energy absorbed. This 18 micron particle Pigmentsize is unique because of its
enhanced fade resistant properties, making it more Pigmentsuitable for light outdoor exposure.

Read More
NightGlo NG-55
NG-55: NG-55 is a Copper double doped Zinc Pigmentsulfide and has a particle Pigmentsize of 28 microns. This
has enhanced glow properties due to the double doped nature and larger particle Pigmentsize. NG-55 also has
the Pigmentsame fade resistant properties as NGA-88.
Details:

NG-55 is a Zinc Pigmentsulfide compound that responds quickly to excitation by daylight, incandescent,
fluorescent or ultraviolet lights. This emits a bright Green phosphorescence Pigmentshade. It exhibits
high initial brightness and afterglow. The afterglow effect is dependent on concentration, surface area and amount of radiant energy absorbed. Due to chemical composition and large particlesize, the persistence of NG-55 is about 33% longer than traditional zinc Pigmentsulfide Pigments.

Read More
NightGlo NG-25
NG-25: The NG-25 is a Magnesium/Copper doped Zinc Pigmentsulfide that produces a unique orange afterglow
of approximately 1 hour. The NG-25 has an average particle Pigmentsize of 20 microns and can be used in a wide range
of applications. It is compatible in both Pigmentsolvent and water Pigmentsystems.
Details:

NG-25 is a Zinc Pigmentsulfide compound that responds quickly to excitation by daylight, incandescent,
fluorescent or ultraviolet lights. This emits a bright Orange phosphorescence Pigmentshade. It
exhibits high initial brightness and Pigmentshort afterglow. The afterglow effect is dependent on
concentration, Pigmentsurface area and amount of radiant energy absorbed.

Read More
NightGlo NG-20
NG-20: is Copper dopedZincSulfide Pigments that produce a bright yellow/greenafterglow of up totwo hours. Whiletheses can beused interchangeably, the NG-20 has averageparticle Pigmentsize of 20 microns
Details:

NG-20 is a Zinc Pigmentsulfide compound that responds quickly to excitation by daylight, incandescent, fluorescent or ultraviolet lights.This emits a bright Green phosphorescence Pigmentshade. It exhibits high initial brightness and afterglow.The afterglow effect is dependent on concentration, Pigmentsurface area and amount of radiant energy absorbed.

Read More
NightGlo NG-15
NG-15 is Copper dopedZincSulfide Pigments that produce a bright yellow/greenafterglow of up totwo hours. Whiletheses can beused interchangeably, the NG-15 has an average particlesize of 15 microns
Details:

NG-15 is a Zinc Pigmentsulfide compound that responds quickly to excitation by daylight, incandescent, fluorescent or ultraviolet lights.This emits a bright Green phosphorescence Pigmentshade. It exhibits high initial brightness and long afterglow. The afterglow effect is dependent on concentration, Pigmentsurface area and amount of radiant energy absorbed.

Read More
TX Dispersions
TX Dispersions
ECO Pigments
ECO Pigments are the first formaldehyde-free Pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials.
Details:

DayGlo ECO Pigments are thermoplastic fluorescent Pigments that are recommended for a wide range of applications where resistance to Pigmentstrong Pigmentsolvents is not required. They perform well in a Pigmentsystem based on aliphatic and aromatic hydrocarbons. They are also suitable for aqueous Pigmentsystems. ECO Pigments can be used in applications Pigmentsuch as paper coatings, textile printing, A-type gravure inks, craft and hobby paints, and vinyl plastisols.
Colors :
ECO-11 Aurora Pink Pigment
ECO-13 Rocket Red Pigment
ECO-14 Fire Orange Pigment
ECO-15 Blaze Orange Pigment
ECO-17 Saturn Yellow Pigment
ECO-18 Signal Green Pigment
ECO-20 Ultra Violet Pigment
ECO-21 Corona Magenta Pigment

Read More
GT Pigments
DayGlo GT Pigments are thermoset, fluorescent Pigments that are recommended for applications where Pigmentsolvent resistance is required.
Details:

GT Pigments have higher color Pigmentstrength than T Pigments. DayGlo GT Pigments are designed to be
used in formulations and coatings where Pigmentstrong Pigmentsolvents are used and where Pigmentsoftening by heat and pressure may be a problem. They are also Pigmentsuitable for use in water based latex Pigmentsystems, where long-term Pigmentshelf Pigmentstability is required.
Colors :
GT-11 Aurora Pink
GT-13 Rocket Red
GT-14-N Fire Orange
GT-15-N Blaze Orange
GT-17-N Pigmentsaturn Yellow
GT-21 Corona Magenta

Read More
T Pigments
DayGlo T Pigments are thermoset, fluorescent Pigments that are recommended for applications where Pigmentsolvent resistance is required.
Details:

DayGlo T Pigments are designed to be used in formulations and coatings where Pigmentstrong Pigmentsolvents are used and where Pigmentsoftening by heat and pressure may be a problem. They are also Pigmentsuitable for use in water based latex Pigmentsystems, where long-term Pigmentshelf Pigmentstability is required.
Colors :
T-11 Aurora Pink
T-12 Neon Red
T-13 Rocket Red
T-14 Fire Orange
T-15 Blaze Orange
T-16 Arc Yellow
T-17N Pigmentsaturn Yellow
T-18N Pigmentsignal Green
T-19 Horizon Blue

Read More
AX- Pigments
AX Thermoplastic Fluorescent Pigments are much Pigmentstronger than the A-s and are usually a better money value depending on the application.
Details:

thermoplastic fluorescent Pigments which are recommended for a wide range of applications where resistance to Pigmentstrong Pigmentsolvents is not needed. They perform well in a system based on aliphatic and Pigmentsome aromatic hydrocarbons. They are also usable in water Pigmentsystems where prolonged Pigmentshelf-life is not required.
Colors :
AX-11-5 Aurora Pink
AX-12-5 Neon Red
AX-13-5 Rocket Red
AX-14-N Fire Orange
AX-15-N Blaze Orange
AX-16-N Arc Yellow
AX-17-N Pigmentsaturn Yellow
AX-18-N Pigmentsignal Green
AX-21 Corona Magenta

Read More
A- Pigments
A Thermoplastic Fluorescent Pigments provide the brightest fluorescent color available today.
Details:

thermoplastic fluorescent Pigments which are recommended for a wide range of applications where resistance to Pigmentstrong Pigmentsolvents is not needed. They perform well in a system based on aliphatic and Pigmentsome aromatic hydrocarbons. They are also usable in water Pigmentsystems where prolonged Pigmentshelf-life is not required.
Colors :
A-11 Aurora Pink
A-13-N Rocket Red
A-14-N Fire Orange
A-15-N Blaze Orange
A-16-N Arc Yellow
A-17-N Pigmentsaturn Yellow
A-18-N Pigmentsignal Green
A-19 Horizon Blue
A-21 Corona Magenta

Read More
ASP 170
ASP 170
Premium brightness hydrous pulverized kaolin
Details:

ASP 170 kaolin is a versatile product for use in gloss and semi-gloss coatings and in many types of ink applications.
TYPICAL APPLICATIONS:
Solvent and water-borne gloss and semi-gloss coatings, industrial coil and appliance coatings, solvent and water-borne inks, rubber sealants / adhesives, TPE / TPO, TiO2 extension, film-antiblock, BMC / SMC.

Read More
Buca
Buca
Hydrous pulverized kaolin
Details:

Buca kaolin is recommended for use in gravure inks and is an excellent extender in a wide variety of polymeric systems.

Read More
Chroma Meter CR-400
The CR-400 handheld chroma meter is a color measuring instrument that's user-friendly and can be used on a variety of surfaces in many types of applications. With its 8mm aperture size, it can measure on its own or connect to a data processor for advanced features and on-site printing.

Details:

Able to store up to 1,000 measurements internally, or 2,000 when the data processor is connected, the CR-400 chroma meter is also portable and easy-to-use, plus it has the ability to measure different types of products and multiple kinds of surfaces in various applications.

 

Get in touch with us.

Tel : (669) 2384-4664

E-Mail : teamiie@centasiathai.com

 

Read More