UV-Absorbers, Hindered Amine Light Stabilizers for paint coating ink plastic rubber and automotive part
General, Specialty Antioxidants for paint coating ink plastic rubber and automotive part
The combination of rainbow-like color, aluminum core and fine particle size in SpectraFlair pigments create the appealing, iridescent, liquid silver metallic
appearance. SpectraFlair pigments change from a typical metallic paint appearance in low illumination, to vivid,multi-rainbow paints in direct bright light.
With a flake thickness less than 0.30 microns, Plus 25 has up to three times the surface area as compared to
SpectraFlair 1400- and 1500-Series diffractive pigments, significantly improving hiding power. The net benefit is a stronger, more dramatic diffractive effect and significantly lower applied cost.
The combination of rainbow-like color, aluminum core and fine particle size in SpectraFlair pigments create the appealing, iridescent, liquid silver metallic
appearance. SpectraFlair pigments change from a typical metallic paint appearance in low illumination, to vivid,multi-rainbow paints in direct bright light.
approximately 0° and 45° respectively, the number represents the pigment’s approximate hue at normal viewing angle.
ChromaFlair pigments are unique, multi-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles. Created using a revolutionary thin-film technology, each flake exhibits a wide range of hues depending on the angle at which it is viewed
and the angle of incidence of light – a dramatic color shift that is even achievable in low-light environments. Highly chromatic, durable and easy to incorporate, ChromaFlair pigments can add value and appeal to virtually any product where color is a key differentiating factor.
Colour : Red/Gold 000L, Silver/Green 060L, Gold/Silver 080L, Green/Purple 190L, Cyan/Purple 230L, Blue/Red 280L, Magenta/Gold 334L
required. Seven standard colors are currently available and their names reflect the color seen at approximately 0° and 45° respectively, the number represents the
pigment’s approximate hue at normal viewing angle
ChromaFlair pigments are unique, multi-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles. Created using a revolutionary thin-film technology, each flake exhibits a wide range of hues depending on the angle at which it is viewed
and the angle of incidence of light – a dramatic color shift that is even achievable in low-light environments. Highly chromatic, durable and easy to incorporate, ChromaFlair pigments can add value and appeal to virtually any product where color is a key differentiating factor.
Colour : Red/Gold 000, Silver/Green 060, Gold/Silver 080, Green/Purple 190, Cyan/Purple 230, Blue/Red 280, Magenta/Gold 334
technology (trapping pigment inside a shell of amorphous silicon dioxide) provides long shelf stability and prevents oxidation of the aluminum layer.
With the standard type, gold to russet colour tones specific to iron oxide can be expressed.
A black type with blackness added by reduction-treating the iron oxide layer is also available.
Average Particle Size : 30, 80 ?m
Colour : TY (Gold)
Substrate Thickness : 1 ?m
The use of silver achieves remarkably strong brilliance.
There are also additional products coated with pure gold on top of the silver.
Average Particle Size : 25, 30, 80, 90, 150, 230, 480 ?m
Colour : PS (Platinum Silver)
Substrate Thickness : 1, 5 ?m
The Metashine Titania Coat Series is defined by high transparency and brilliant interference colours. Both glass and titanium dioxide are transparent substances and, therefore, products of this series provide high transparency.
In the light that reflects off the coated layer and glass surface, a difference in optical path is generated. By adjusting the coating thickness of the titanium dioxide, the optical path difference is varied and five colours of interference light are generated.
Average Particle Size : 20, 30, 40, 80, 120 ?m
Colour : RB (Blue), RG (Green), RR (Red), RY (Yellow), RS (Silver)
Substrate Thickness : 1 ?m
OPTICAL BRIGHTENERS
D-298 Columbia Blue (Solvent Soluble)
D-286 Sky Blue (Solvent Soluble)
D-282 UV-Blue (Water Soluble)
D-211 Ice Blue (Solvent Soluble)
- They are easily handled as a dry powder and incorporate well into polyolefins under normal processing conditions.
- They offer superior clarity, extraction and migration properties.
- They have received FDA approval.
The Gem-Tone colorants are solid, amorphous resinous materials of high molecular weight. They offer high tinctoral strength, with superior optical & migration properties. This patent pending technology has FDA approval (see section 3 FDA) allowing for worry free formulations.
Colors :
-Gem-Tone GC13F Ruby Red
-Gem-Tone GC17F Citrine Yellow
-Gem-Tone GC18XPF Emerald Green
-Gem-Tone GC19F Pigmentsapphire Blue
-Gem-Tone GC19XPF Pigmentsapphire Blue
-Gem-Tone GC26F Crimson Red
DayGlo ZQ Pigments are an improved version of DayGlo Z Pigments. They offer lower mold plate-out,
increased plastic compatibility, require lower processing temperatures, and have larger particle Pigmentsize to reduce dusting.
Colors :
Z-21-3 Corona Magenta Pigment
ZQ-12 Neon Red Pigment
ZQ-13 Rocket Red Pigment
ZQ-14 Fire Orange Pigment
ZQ-15 Blaze Orange Pigment
ZQ-16 Arc Yellow Pigment
ZQ-17 Saturn Yellow Pigment
ZQ-18 Signal Green Pigment
ZQ-19 Horizon Blue Pigment
ZQ-21 Corona Magenta Pigment
DayGlo Z Pigments, because of their good heat Pigmentstability and Pigmentsmaller particle Pigmentsize (10-12microns), are recommended for plastics applications where dispersion is important (rotational molding is a good lowshear example that would benefit from a Pigmentsmaller particle Pigmentsize). They also offer good tinctorial Pigmentstrength and bright Pigmentshades.
Colors :
Z-11-3 Aurora Pink Pigment
Z-12-3 Neon Red Pigment
Z-13-3 Rocket Red Pigment
Z-14-3 Fire Orange Pigment
Z-15-3 Blaze Orange Pigment
Z-16-3 Arc Yellow Pigment
Z-17-N Saturn Yellow Pigment
Z-18-3 Signal Green Pigment
Z-21-3 Corona Magenta Pigment
DayGlo VC-s have exceptional brightness, high tinctorial Pigmentstrength, are translucent, and possess
excellent heat Pigmentstability; Pigmentsurpassing melamine-formaldehyde Pigments in these characteristics.
VC-s are vinyl based and recommended for calendered, extruded and injection molded vinyl.
Colors :
VC-11 Aurora Pink Pigment
VC-13 Rocket Red Pigment
VC-17 Saturn Yellow Pigment
VC-45 Strong Pink Pigment
including PVC, latex, polyurethane, and polysulfideto name a few.
Triaryl phosphate ester. Acts as a plasticizer with flame-retardant properties suitable for use in a variety of polymer systems. Offers a high level of solvation, fast processing and compatibility limits that are wide enough for virtually all types of formulations. Imparts a significant level of fire retardance to vinyl as well as vinyl nitrile foams, and it helps the foamed product meet certain specified flammability performance criteria. Also acts as a processing aid and contributes to excellent cell structure. In polyvinyl acetate emulsions, Santicizer 154 gives flexibility, assists film formation and generally improves the water resistance. Also provides a significant level of flame retardance to the composition.
Isodecyl diphenyl phosphate. Acts as a plasticizer. Imparts to PVC a low-temperature flexibility almost equivalent to that of DOP. Offers good flame retardancy, low smoke, easy processability and low volatility. Provides economical self-extinguishing properties. Due to its low volatility, the properties of flame retardancy and flexibility imparted by Santicizer 148 to PVC articles are well retained at low temperatures. Is particularly recommended for low smoke vinyl cable sheath when flame retardancy, flexibility at low temperatures and low ageing at high temperatures must be combined. Used in upholstered furniture, coverings for public transportation, wall coverings and cable insulation.
2-Ethylhexyldiphenyl Phosphate. Used as a flame retardant plasticizer for the majority of industrial polymers, including PVC and its copolymers, cellulose nitrate, cellulose acetatebutyrate, ethylcellulose, polymethylmethacrylate and polystyrene. Offers low-temperature properties. Exhibits low smoke density, good resistance to abrasion and to oils and fats. Imparts very good light stability and weather resistance, and exceptional high-frequency weldability. Can be used and appreciated for the preparation of vinyl sheets, plastisols and organosols, vinyl packing materials, and conveyor belts.
Monomeric phthalic ester plasticizer. Used in acrylic coatings and acrylic powder coatings. Possesses very low volatility, fast fusion characteristics, very low efficiency and outstanding stain resistance. Provides very good resistance to water spotting, great toughness and very good adhesion. Improves flow-out characteristics.
application in PVC film and sheeting, coated fabrics, plastisols, organosols, vinyl foams, polyurethane and polysulfide caulks and sealants, and acrylic lacquers. Extraction resistance
against alcohol and kerosene is comparable to low molecular weight polymeric plasticizers.
Fast fusing phthalate plasticizer. Used in acrylic coatings. Possesses very good resistance to extraction, low initial viscosity, good shelf life and flow properties. Provides very good durability, anti-fogging properties, good adhesion to metal undercoats, improved weatherability and good solvent-craze resistance. Offers gloss, good flow characteristics and flexibility without brittleness for a long, handsome coating life.
The solubilizing action of Santicizer 160 helps ensure that lubricants and other surface-active additives don’t interfere with post-decorative ink adhesion or dielectric sealing applications. In most PVC applications, Santicizer 160 is used with general-purpose plasticizers to improve processing characteristics and finished product performance.
Butyl benzyl phthalate. Used as a very good plasticizer in paints, inks and coatings. Reduces Tg. Offers high compatibility with acrylics, nitrocellulose and urethane compositions. Improves flexibility, coalescing and cold check performance of cure films. Provides very good weatherability, paintability and long term anti-fungal properties. Offers improved resistance to extraction by water, superior physical properties and retention of physicals, resistance to hydrolysis and to extraction by jet fuels. Gives very good gloss, desirable flexibility and flowout.
and mineral oils. This plasticizer is thusrecommended and used for oil resistant cable jacketingand hoses
Santicizer
409A isapolymeric plasticizer - a modified polybutylene adipate - which presents a remarkable balance of properties:performance, efficiency, migration and extractionresistance, humidity compatibility, low temperature flexibility and excellent processing characteristics incalendering as well asspreadcoating applications.
Santicizer 409A is the reference product in the Ferro series of polymeric plasticizers. It isrecommendedfor
usein all applicationfields wherea polymeric plasticizer isneeded e.g. refrigerator gasketing, extractionresistant cable jacketingand pipes, adhesive backed films andtapes, but also in synthetic leathercloth, packaging films and nitrilerubbers.
High brightness surface treated kaolin
Translink 555 is designed to be compatible in polyamides, polyester epoxies, phenolics and other polar polymers. Its low residue and finer particle size offers excellent impact strength in engineered polymers.
TYPICAL APPLICATIONS:
Polyamides (6, 66 and blends), TPE / TPO, epoxy and polyurethane coatings.
High brightness surface treated kaolin
Translink 445 kaolin is a high-performance reinforcing extender designed to be compatible in polyamides, polyesters, epoxies, phenolics and other polar polymers. Translink 445 kaolin reduces water absorption, increases tensile and flexural strength, increases heat deformation temperature and improves dimensional stability when compounded in polymeric systems.
TYPICAL APPLICATIONS:
Polyamides (6, 66 and blends), TPE / TPO, epoxy and polyurethane coatings.
High brightness surface treated kaolin
Translink 37 is a high performance reinforcing extender designed to reduce water transmission in cross-linked polyethylene and EPR polymer systems when used in electrical applications. It is recommended for use with peroxide cure systems.
TYPICAL APPLICATIONS:
Phenolics, EPR power cables, pharmaceutical rubbers, polyester gel coats, electrical connectors, electrical capacitors, TPE / TPO, wire jacketing, silicone rubber.
High brightness surface treated kaolin
Translink 77 kaolin is a premium performance reinforcing extender. Translink 77 kaolin provides excellent initial and aged wet electrical properties. It is recommended for use with peroxide cure systems.
TYPICAL APPLICATIONS:
EPR power cables, silicone rubber, TPE / TPO, electrical capacitors, mechanical rubber goods, electrical connectors, polyester gel coats.
Standard brightness calcined kaolin
Satintone SP-33 has been specially designed for use as an acid scavenger in medium and high voltage PVC wire insulation compounds.
TYPICAL APPLICATIONS:
Medium and high voltage PVC wire, rubbers for running tracks.
High brightness calcined kaolin
Satintone W has a very good balance of optical and mechanical properties and also provides abrasion resistance in traffic paints. It is a general purpose kaolin grade used in a wide variety of polymeric systems and is highly recommended for titanium dioxide extension.
TYPICAL APPLICATIONS:
Water-borne interior / exterior flats, solvent-borne interior / exterior flats, rubbers, TiO2 extension, polyamides (6, 66 and blends), pharmaceutical rubbers, industrial safety coatings, film-antiblock, electrical capacitors, rubber sealants / adhesives,
Delaminated spray dried kaolin
ASP NC X-1 kaolin's delaminated structure improves stain resistance and washability in paints. It is an excellent titanium dioxide extender and improves opacity of paints. It provides synergistic properties when used in combination with calcined kaolins such as Satintone W or Mattex.
TYPICAL APPLICATIONS:
Water-borne interior flat and eggshell paints, solvent-borne interior flat and eggshell paints and mechanical rubber goods
Standard brightness hydrous pulverized kaolin
ASP 400P kaolin is our coarsest particle size grade providing a higher aspect ratio compared to our other ASP grades. ASP 400P kaolin is widely used in industrial and architectural primers as it improves enamel holdout and allows for higher loading in paints. ASP 400P is designed for use in stains and glass-reinforced thermoset systems.
TYPICAL APPLICATIONS:
Water-borne and solvent-borne exterior flats and primers, BMC / SMC, pultrusion profiles.
Able to store up to 1,000 measurements internally, or 2,000 when the data processor is connected, the CR-400 chroma meter is also portable and easy-to-use, plus it has the ability to measure different types of products and multiple kinds of surfaces in various applications.
Get in touch with us.
Tel : (669) 2384-4664
E-Mail : teamiie@centasiathai.com
